Behringer Pro Mixer DJX700 User Manual
ENGLISH
PRO MIXER DJX700 User Manual
3
Control elements
Stereo channels 1 to 4
Use the LINE/CD switch to select the input signal for channel 1. Unlike other channels, channel 1 features two line inputs.
{1}
You determine the input signals for the channels 2 to 4 with the PHONO/CD i. e. PHONO/LINE switch (channels 3 and 4).
{2}
“Phono” is intended for connecting a turntable. “Line” i. e. “CD” must be selected for all other signal sources (e. g. CD or MD
players). The input sensitivity of the phono input can be switched to line level, allowing utmost flexibility (see [41]).
players). The input sensitivity of the phono input can be switched to line level, allowing utmost flexibility (see [41]).
Never connect devices with line level to the highly sensitive phono inputs! The output level of phono pick-up systems is
◊
measured in millivolts, whereas CD players and tape decks have levels measured in volts, i.e. the level from line signals
is up to 100 times higher than that of the phono inputs.
is up to 100 times higher than that of the phono inputs.