Behringer Ultramatch Pro SRC2496 User Manual

ULTRAMATCH PRO SRC2496 User Manual

The BEHRINGER ULTRAMATCH PRO is a fully digital signal processor integrating 

24-bit A/D and D/A converters. With its wide range of features, it provides a 

powerful state-of-the-art interface between the physical reality of music and its 

recording in digital form. To retain the true authenticity of your music, we not 

only developed a strong link between analog recording technology and the huge 

variety of signal processing possibilities available in the digital world, but also 

designed the ULTRAMATCH PRO SRC2496 to function as a universal inter-face 

between the various digital formats and sampling rates.
Thus, incompatibilities between different equipment with regard to modified 

connectors, transmitted signals and applied standards are definitely a thing of 

the past.

The philosophy behind BEHRINGER products guarantees no-compromise 

circuit design and the best choice of components. We only use low-tolerance 

resistors and capacitors, high-grade switches and buttons as well as other 

select components to make sure that you can fully benefit from state-of-the-

art 24-bit/96 kHz technology with regard to low noise and high dynamics. 

With the ULTRAMATCH PRO you have purchased some cutting-edge technology. 

Today, a lot of hi-fi equipment is already equipped with a digital interface, so the 

SCR2496 can not only be used as a high-end A/D and D/A converter in your studio, 

but also raises your home hi-fi system to a new level in terms of dynamics, 

low distortion and definition. It is thus possible to replace one of the weak points 

in the signal chain with an absolutely powerful unit.
The SRC2496 provides you with the functionality of a first-class A/D and D/A 

converter, an outstanding sampling rate converter and a digital patchbay. 

Additionally, it can be deployed as a format converter, to set or remove copy bits, 

and as a signal refresher—but is still easy to operate.
The front panel of your ULTRAMATCH RO features a functional and easily 

understandable layout. On the left-hand half of the panel you will find the 

monitor (left) and input sections (right); the right-hand half includes the mode 

(left) and output sections (right). Just imagine the signal passing through the 

unit from left to right and the design logic becomes clear.
The monitor section enables you to monitor analog input/output signals. 

The level meter reads the analog input level and allows you to adjust it optimally. 

The status LEDs in the input section make it easy to check which type of digital 

signal (AES/EBU or S/PDIF) is being received and also display its sampling rate. 

Since the ULTRAMATCH PRO is automatically synchronized to any input signals 

within a range from 31 Hz to 100 kHz, there is no need for dedicated sampling 

rate selector switches on the input side.
In the mode section you can see which of the SRC2496’s two basic functions 

(A/D and D/A converter or sampling rate converter) is currently active. Select the 

function of your choice at the touch of a button. The output section gives 

you the buttons and displays to adjust a variety of parameters for the digital 

output signal. 
The ULTRAMATCH PRO stores the last setting made before power-down, so you 

can continue from where you stopped when you turn the unit back on again.
In a later section of this manual we will give you a detailed description of how you can 

use your ULTRAMATCH PRO in various applications.

Your ULTRAMATCH PRO was carefully packed at the factory and the packaging is 

designed to protect the unit from rough handling. Nevertheless, we recommend 

that you carefully examine the packaging and its contents for any signs of 

physical damage which may have occurred during transit. 

If the unit is damaged, please do NOT return it to BEHRINGER, but notify 
your dealer and the shipping company immediately, otherwise claims 
for damage or replacement may not be granted. Shipping claims must 
be made by the consignee. 

The BEHRINGER ULTRAMATCH PRO requires one rack unit  for installation in a 19" 

rack. Please allow for an additional 4" of rack depth for the rear panel connectors.
For rack mounting, please use M6 metal nuts and bolts.
Be sure that there is enough air space around the unit for cooling. For example, 

to avoid overheating, do not place the ULTRAMATCH PRO on power amps.

The fuse holder at the AC power connector has 3 triangular markings. Two of 

these three triangles will be aligned with one another. The ULTRAMATCH PRO 

is set to the voltage shown next to these markings and can be switched over by 

twisting the fuse holder by 180°. IMPORTANT: This does not apply to export 

The mains connection is made by using the enclosed power cord and a standard 

IEC receptacle. It meets all of the international safety certification requirements.

(1)

(2)

(3)

Fig. 2.1: Front panel control elements 

(1) 

Monitor and input sections. The monitor section enables you to adjust 

the signal level applied to the analog input and features a controllable 

headphone connector. A clearly structured LED array provides you with 

detailed information on the various parameters of the digital input signal.

(2) 

Mode section. Here, you can determine whether your ULTRAMATCH PRO is 

working as a sampling rate converter or A/D-D/A converter. 

(3) 

Output section. The buttons in the output section allow you to tailor the 

output signal to meet your requirements. 
Similarly to the input section, the display provides you with all the 

information on the output signal.