Bang & Olufsen BeoVision 9 User Manual

Set up your television 

Important 

Follow the guidelines for placement and connection described on this and the 

following pages. 

When you place the TV, remember that the built-
in motor unit will turn the TV to a preset position 
when you switch it on. 

When you have placed the TV, remove the two 
supports beneath the front frame. 

The cover has strips of double-coated tape on the 

back. 

Before you fasten the cover permanently, try to 
put it into place without removing the tape 
backing. 

Due to the heavy weight of the TV, any moving or 
lifting of the TV should be performed by qualified 
personnel – using the proper equipment. 

Unscrew the screws inside each support. 

To ensure proper ventilation, allow for at least 5 cm (2") of space on each side of the TV and 10 cm (4") 

above it. Do not cover the ventilation holes on the rear. 

At overheating (flashing standby indicator and an on-screen warning), switch off the TV to let it cool. 

You cannot operate the TV during this time. 

44