Bang & Olufsen BeoVision 9 User Manual

Page of 68
Switch on the TV in TV or Home cinema mode 
before you adjust speaker settings for either 
mode. 
Select speaker setup 
Select ‘SOUND’ in ‘OPTIONS’ 
menu 
Switch on TV and bring up ‘TV 
SETUP’ menu 
Sound during setup 
Speaker roles
During the setup process, a sound is sometimes produced by a speaker. 
Check if the highlighted speaker matches the name of the speaker 
making the sound. 
You must select the surround speakers before you can select the back 
speakers. 
Set speaker type 
Register the type of each speaker in the menu. 
Each Bang & Olufsen speaker makes a sound 
and is highlighted on the screen. 
Select the function for each connected 
loudspeaker, such as front, back or surround. A 
speaker can have more than one role – one for 
TV viewing and one for Home cinema viewing. 
Set speaker role 
Loudspeaker setup 
Select speaker and reveal 
speaker type 
Select ‘SPEAKER TYPES’ menu 
Reveal speaker role for each 
speaker 
Select ‘SPEAKER ROLES’ menu 
Add Power Link speakers and up to two BeoLab subwoofers to your TV and you 
have a surround sound system. 
Accept 
Accept 
Select menu 
Information 
NOTE! To make a Home cinema setup, you must 
first switch to Home cinema mode. For information 
about Home cinema, see p. 30. 
 
TV (1)  
Home cinema (2) 
A:  Right front  
Left front 
B:  Left front  
Left surround 
C:  Off  
Left back 
D:  Off  
Right back 
E:  Left back  
Right surround 
F:  Right back  
Right front 
G:  Off  
Centre 
Set speaker role. 
A
B
C
D
E
F
G
1
54