Westinghouse up to 25.5 SEER iQ Drive Technical Manual
s
which provides fully variable operation.
s
ozone depleting refrigerant.
s
urethane coat finish. The 950 hour salt spray finish resists
corrosion 50% better than comparable units.
corrosion 50% better than comparable units.
s
outdoor coils are designed to optimize heat transfer, mini-
mize size and cost, and increase durability and reliability.
mize size and cost, and increase durability and reliability.
s
brushless motor for long lasting reliability and quiet
operation. Requires no maintenance and is completely
protected from rain and snow.
operation. Requires no maintenance and is completely
protected from rain and snow.
s
reduce unwanted compressor noise.
s
operation. The specific energy absorbing hub is designed to
reduce noise while operating through various frequencies.
reduce noise while operating through various frequencies.
s
protects the coil from yard hazards and extreme weather.
s
from the top without disconnecting fan motor leads.
s
high system pressures. Auto-reset feature prevents
nuisance service visits.
nuisance service visits.
s
refrigerant charge.
s
s
and quiet operation.
s
make servicing easier for the contractor, access panels
are provided to all controls and the compressor from the
side of the unit.
are provided to all controls and the compressor from the
side of the unit.
s
to 25.5 SEER with sound ratings of 59-72dB depending
upon operating conditions.
upon operating conditions.
&3")
The iQ Drive
®
Air Conditioning System features fully
variable speed compressor technology and variable speed
indoor and outdoor motors. The system provides variable
cooling capacity as needed. It operates near the nominal
rated capacity at the thermostat set point and modulates
as temperature difference between set point and room
temperature changes. The system may run at additional
18% capacity to provide rapid cooling. The system has a
built-in humidity control that will activate humidifier equipment
(if supplied), and reduces blower speed if indoor relative
indoor and outdoor motors. The system provides variable
cooling capacity as needed. It operates near the nominal
rated capacity at the thermostat set point and modulates
as temperature difference between set point and room
temperature changes. The system may run at additional
18% capacity to provide rapid cooling. The system has a
built-in humidity control that will activate humidifier equipment
(if supplied), and reduces blower speed if indoor relative
humidity is greater than set point (default set at 60%).
2
!
&%!452%3
s
n
n
the entire unit, if the unit’s major component (heat
exchanger or compressor) fails within the first 10 years
of operation, to the original owner. All split system
products must be installed with a matched indoor air
handler or indoor coil to qualify.
exchanger or compressor) fails within the first 10 years
of operation, to the original owner. All split system
products must be installed with a matched indoor air
handler or indoor coil to qualify.
n
year All Parts Warranty and Quality Pledge within a
limited period of time after the installation. See current
warranty document or visit our consumer web site
for warranty details.
limited period of time after the installation. See current
warranty document or visit our consumer web site
for warranty details.
7!22!.49
4%#(.)#!,
30%#)&)#!4)/.3
30%#)&)#!4)/.3