Bunn Beverage Dispenser FMD-5 User Manual

30

P1685

FIG. 19 DIGITAL TOUCH CONTROL 

SWITCH 

TO DOOR INTERCONNECT

HARNESS CONNECTOR

DIGITAL TOUCH CONTROL SWITCH (cont.)
Removal and Replacement:

1.  Open the dispenser door.

2.  Remove the five #6-32 screws securing the bottom 

door cover and remove cover.

3.  Disconnect the wires on the dispense switch to be 

removed from the door interconnect wiring har-

ness.

4.   From inside the door gently push the switch away 

from the door and discard.

5.  Remove the paper from the adhesive backing on 

the switch and feed the ribbon cable on the back 

of switch through the slot in the door.

6.  Firmly press the new switch into the opening on 

the door to hold the switch in the door. 

7.  Reconnect the wires to the dispense switch from 

door interconnect wiring harness.

8.   Reinstall the door bottom cover using five #6-32 

screws.

9.  Refer to Fig. 19 when reinstalling wires.      

Align arrows on 

connectors

42672 122209