Manualsbrain.com
  1. Manuals
  2. Brands
  3. Bunn
  4. Single SH DBC* (with Smart Funnel)
  5. Owner's Manual

Bunn Single SH DBC* (with Smart Funnel) Owner's Manual

Download
Page of 50
Page 20
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
% BYPASS
 
This function allows adjustment of the amount of 
water that bypasses the grounds. The number signi-
fies the percentage of the brew volume which does 
not flow over the coffee grounds.
Modifying recipes - bypass percentages:
Range: 0% to 90% for all three batch sizes
NOTE: If the brewer is already in the % BYPASS screen, 
it is not necessary to follow steps 1 through 6 in this 
section, but proceed directly to step 7.
1.  Press and hold the ® pad until the display reads 
SET NEW RECIPES. Release the ® pad. Press the 
® until the display reads REVIEW RECIPES.
2. Press YES to proceed. The display should now 
read NO NAME, along with MODIFY, SHOW and 
NEXT.
3.  Press and release NEXT to advance to the desired 
coffee name to be modified.
REVIEW RECIPES?
NO                     YES
3 BATCHES DONE?
NO                     YES
3 BATCHES DONE?
NO                     YES
SET PULSE BREW?
NO                     YES
BREW OZ.  XX.X
(-)       DONE       (+)
% BYPASS  XX.X
(-)       DONE       (+)
NO-NAME
MODIFYSHOWNEXT
(COFFEE NAME)
MODIFYSHOWNEXT
THAT WAS THE
LAST RECIPE
EXIT TO
NEXT FUNCTION
SCREEN
ADVANCES TO ALL OTHER
COFFEE NAMES PROGRAMMED
IN THE BREWER'S MEMORY
WHEN THE LAST COFFEE NAME
IN THE BREWER'S MEMORY IS
DISPLAYED, PRESSING NEXT
WILL EXIT AND THE DISPLAY
WILL THEN READ:
SEE MODIFYING
PULSE BREW ON
THE FOLLOWING PAGE
OR PRESS AND RELEASE
ON/OFF SWITCH TO EXIT THE
% BYPASS SETUP AND
RETURN TO THE MAIN SCREEN
P2444
4.  Press and release MODIFY. The display should 
read BREW OZ. 
5.  Press and release DONE. The display should read 
3 BATCHES DONE?.
6.  Press and release YES. The display should now 
read % BYPASS, and a batch light will be blinking. 
Press and release the batch size to be modified.
7. Using (-) and (+) set the amount of bypass water 
(percentage) to be dispensed around the grounds 
for that particular batch size.
8.  When finished, press another batch size and repeat 
step #7 for each batch to be modified.
9.   When finished setting all batch sizes, press DONE. 
The display should read 3 BATCHES DONE? 
10. If they are not correct, press and release NO to 
return to the % BYPASS setup screen.
11. If the 3 batch sizes are correct, press YES. This will 
advance to SET PULSE BREW. Another alternative 
is to press the 
 pad to exit the % BYPASS setup 
and return to the MAIN SCREEN.
34025  022509