Blaupunkt TRIER RCR 126 User Manual

28

To “define” a second Key-
Card for use with the set.
Please read the information
under “KeyCard theft-pro-
tection system”.

To quit the DSC programming mode and
store the adjustment:
•

Press DSC.

If the setting remains unchanged within 8
seconds, the system will automatically store
the last adjustment. The display will switch
back to the previous condition.

TA VOL

: 4

BEEP

: 3

LED (Code) : 1
LOUD

: 4

RM

: OFF

LOCAL

: 1

DIS

: 1

Mechanism/cassette tapes
To avoid possible problems, you should not
use cassette tapes longer than 60 or 90
minutes (C60/C90). Store your tapes in a
cool place away from dirt, dust and tempera-
tures exceeding 50 

°

Celsius. Allow very cold

tapes to warm up before playing them in
order to avoid uneven tape transport. After
approximately 100 hours of use, dust partic-
les collected on the playback head or roller
may lead to tape run problems and sound
distortions.
Use a head cleaning tape to remove normal
dirt build-up. For tougher cases, use a cotton
swab (Q-Tip) soaked with alcohol. Do not
attempt to clean by inserting a hard object
into the player!

Amplifier
Output power:

4 x 20 W RMS power

acc. to DIN 45324
(14,4V),
4 x 30 W max. power

FM waveband
Sensitivity:

1,0 

µ

V at 26 dB

signal-to-noise ratio

Frequency
response:

35 - 16 000 Hz

Tape player
Frequency
response:

35 - 16 000 Hz

Subject to modifications!

 BA Trier RCR 126 gb®

13.05.2002, 11:52 Uhr

28