Black & Decker ADV1220 User Manual

u

Regularly check the power lead and 

connector for damage. If the supply 

cord or connector is damaged, it must 

be replaced by the manufacturer or 

an authorised Black & Decker Service 

Centre in order to avoid a hazard.

u

Never attempt to remove or replace 

any parts other than those specified in 

this manual.

u

Unplug the charger before cleaning the charger or charg-

ing base.

u

When not in use, the appliance should be stored in a dry 

place.

u

Children should not have access to stored appliances.

Additional residual risks may arise when using the tool which 

may not be included in the enclosed safety warnings. These 

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations 

and the implementation of safety devices, certain residual 

risks can not be avoided. These include:

u

Injuries caused by touching any rotating/moving parts.

u

Injuries caused when changing any parts, blades or ac-

cessories.

u

Injuries caused by prolonged use of a tool. When using 

any tool for prolonged periods ensure you take regular 

breaks.

u

Impairment of hearing.

u

Health hazards caused by breathing dust developed when 

using your tool (example:- working with wood, especially 

oak, beech and MDF.)

The appliance is designed for use with 12 V negative ground 

vehicle battery systems.

Warning! The cigarette lighter connector is fitted with a non-

serviceable safety fuse. The fuse may operate in the event of 

a fault. If this occurs the fuse must be replaced together with 

the connector and cable by the manufacturer or an authorised 

Black and Decker Service Centre in order to avoid a hazard.

Warning! Do not operate the appliance with systems which 

have positive ground or a different voltage.

Read all of this manual carefully before using the 

appliance.

This tool includes some or all of the following features.

  1. On/off switch

  2. Bowl release button 

  3. Dust bowl

  4. Nozzle (ADV1220 only)

  5. 12V car connector

  6. Brush head

  7. Crevice tool

  8. Large  brush head

  9. Large crevice tool

 10. Flexible hose

These models may be supplied with some of the following 

accessories:

u

Brush head (6) (ADV1210 only).

u

Crevice tool (7) (ADV1210 only).

u

Large brush head (8) (ADV1220 only).

u

Large crevice tool (9) (ADV1220 only).

u

Flexible hose (10) (ADV1220 only).

u

Insert the appropriate accessory into the front of the appli-

ance. Make sure that the accessory is pushed fully in.

u

Fit the appropriate accessory on to the short end of the 

flexible hose (10). Make sure that the accessory is pushed 

fully on.

u

Fit the long end of the flexible hose (10) into the front of 

the appliance. Make sure that the flexible hose is pushed 

fully in.

u

Make sure that the appliance is switched off.

u

Remove the cigarette lighter from it’s socket.

u

Plug the 12V car connector (5) into the cigarette lighter 

socket.