Behringer Sonic Ultramizer SU9920 User Manual
8
SONIC ULTRAMIZER SU9920 User Manual
Alternatively, you can use professional XLR cables with an XLR socket on one side
and an XLR plug on the other side. This cable connection is the most reliable both
electrically and mechanically.
output
For unbalanced use, pin 1 and pin 3
have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
input
1
2
3
1
2
3
Balanced use with XLR connectors
Fig. 4.3: Balanced XLR plug
4.2.2 Connection with insert cables
Please use standard insert cables equipped with ¼" connectors to connect
Please use standard insert cables equipped with ¼" connectors to connect
the SONIC ULTRAMIZER to the insert path of a mixing console. These Y cables
have two ¼" TS connectors at one end, and one ¼" TRS connector at the
other. Connect the plug marked “Send” to the INPUT L jack on the effects unit.
Connect the “Return” plug to the OUTPUT L jack on the device. Connect the TRS
connector to the insert jack of the channel strip on the mixing console. Use two
insert cables for stereo sub-groups and main-mix inserts. The second cable must
be connected to the INPUT/OUTPUT R jacks of the SU9920.
strain relief clamp
sleeve
tip
sleeve
ground/shield
tip
signal
Return
(out)
strain relief clamp
sleeve
tip
sleeve
ground/shield
tip
signal
Send
(in)
strain relief clamp
sleeve
sleeve
ring
tip
sleeve
ground/shield
ring
return (in)
tip
tip
send (out)
Fig. 4.4: Insert cable with one ¼" TRS (tip-ring-sleeve) jack plug on one end and two ¼" TS
(tip-sleevel) jack plugs on the other end.
(tip-sleevel) jack plugs on the other end.
5. Specifications
Inputs
Connections
XLR sockets and ¼" stereo jacks
Type Balanced
Input impedance
Input impedance
20 kΩ balanced, 10 kΩ unbalanced
Nominal input level
+4 dBu
Maximum input level
+22 dBu
Outputs
Connections
XLR sockets and ¼" stereo jacks
Type Servo-balanced
Output impedance
Output impedance
60 Ω balanced, 60 Ω unbalanced
Maximum output level
+22 dBu
Enhancer Section
Type
3-band phase delay and dynamic filter
PROCESS control
max. 12 dBu @ 5 kHz
LOW CONTOUR control
max. 12 dBu @ 50 kHz
System Data
Frequency response
25 Hz to 50 kHz, +/-3 dB
Signal-to-noise ratio
>95 dB, unweighted, 20 Hz to 20 kHz
Distortion (THD + N)
0.05% typ. @ +4 dBu, 1 kHz (IN/OUT)
Crosstalk
>75 dB
Power Supply
Mains Voltage
USA/Canada
120 VAC, 60 Hz
China/Korea
220 VAC, 50/60 Hz
Europe/UK/Australia
230 VAC, 50 Hz
Japan
100 VAC, 50-60 Hz
Export model
120/230 VAC, 50-60 Hz
Power consumption
approx. 12 W
Fuse
100-120 VAC: T 250 mA, H 250 V
220-240 VAC: T 125 mA, H 250 V
Dimensions/Weight
Dimensions (H x W x D)
approx. 8.5 x 1.8 x 19''
approx. 217 x 44.5 x 483 mm
Weight
approx. 4.84 lbs / 2.20 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.