Behringer B-Control Rotary BCR2000 Owner's Manual
11
B-CONTROL FADER BCF2000/ROTARY BCR2000 User Manual
USB-Mode U-4 (expanded):
Unit 1
USB
MIDI
IN
MIDI IN
MIDI IN
OUT A OUT B/THRU
OUT B/THRU
MIDI-Expander
Unit 2
Software Sequencer
push
Software Synthesizer
move/fade
turn
push
Software Mixer
move/fade
turn
push
VOLUME
MUTE
DEMO
FILTER
LEVEL
PROG
TYPE
COMBI
PLAY
POWER
PHONES
Fig. 4.4: Application in USB mode 4 (expanded)
BCF/BCR2000
BCF/BCR2000
Param. Feedb.
Parameter
Feedback
UNIT 2
MIDI Data Send
MIDI IN
MIDI IN
MIDI-Expander
MIDI OUT A
MIDI OUT A
MIDI OUT B/
THRU
MIDI OUT B/
THRU
USB
USB
Merge
to Computer
from Computer
UNIT 1
MIDI Data Send
Computer
Fig. 4.5: Routing in USB mode 4
This operating mode should be selected if you want to couple two B-CONTROLs
(e.g. 1x BCF2000 & 1x BCR2000) to control your software using both B-CONTROLS
through a common USB port. Additionally, MIDI OUT B of the first controller
(unit 1) can be used from the computer as a 16-channel MIDI output. The data
of both B-CONTROLs is mixed and is sent to the host computer via USB.
Select stand-alone mode 3 for the second unit (unit 2).
4.1.2 Stand-alone modes
The stand-alone modes come into play when the B-CONTROL is not used as
The stand-alone modes come into play when the B-CONTROL is not used as
a USB-controller for controlling PC applications but as a pure MIDI controller.
With all stand-alone modes, all MIDI connectors can be used simultaneously,
and these modes differ only in how the data is transmitted on the MIDI outputs.
Of course, not only sound generators can be remotely controlled (as shown in the
illustrations) but also effects processors, groove boxes, hardware sequencers,
lighting equipment, compact studios, portable keyboards, e-pianos etc. –
basically any equipment with a MIDI input. This can also be your computer with
its own MIDI interface. The USB connector can not be used while your B-CONTROL
is in one of the stand-alone modes. A merge function that makes mixing MIDI
data from two different sources to one output possible is active at output A in
stand-alone modes S-1 to S-3.