Behringer B-Control Fader BCF2000 Owner's Manual

B-CONTROL FADER BCF2000/ROTARY BCR2000 User Manual

Now, release the LEARN button. The B-CONTROL is waiting to receive 

MIDI data

Start transmitting MIDI data from your sequencer. As soon as the data is 

received by the BCF2000 / BCR2000, it is shown in the display

After correct data transmission, the display shows “GOOD” or “BAD” if wrong, 

faulty or too extensive data has been sent

To leave or cancel LEARN, press the EXIT button

4.3.2  Programming in EDIT mode
Various types of MIDI commands (Pitchbend, After Touch, MMC etc.) are assigned 

to the individual control elements in EDIT mode.

To activate the EDIT mode, press and hold the EDIT button and operate 

a control element. This can be a fader, sustain pedal (BCF2000 only), 

an encoder (BCR2000 only), a push encoder, a button or footswitch. 

The control element is indicated in the display (e.g. E 24 or Fd 8)

Release EDIT; you are now in the EDIT mode

Using the push encoders, you can now assign MIDI commands to the selected 

control element. You will find all possible MIDI function in tables 4.1 and 4.2, 

including all accompanying explanations

If you want to assign MIDI data to additional control elements, just press 

and hold the EDIT button and move one of the control elements. Now, let go 

of both controls and use the push encoders to assign a function to it 

(see tables 4.1 and 4.2)

To leave the EDIT mode, press EXIT

The detailed EDIT functions are described in the following two tables. 

With the assignable control elements, we differentiate between CONTINUOUS 

and SWITCH types.

CONTINUOUS-type control elements (table 4.1) include the eight BCF2000 

faders and sustain pedal, the 24 encoders of the BCR2000, the turn function 

of the push encoders

SWITCH-type control elements (table 4.2) are buttons, press functions for 

push encoders and footswitches

 

CONTINUOUS TYPE CONTROLLERS (encoders, turn function of Push Encoders, faders, foot controller)

PROGRAM CHANGE

1-16

Off, Bank Select MSB

Off, Bank Select LSB

—

—

See below 1*

Value indication: 

On/Off

CC (Control Change)

1-16

CC-0-127

Min. value: 

0-127/16383

Max. value: 

0-127/16383

Absolute

Absolute (14-Bit)

Relative 1

Relative 2

Relative 3

Relative 1 (14-Bit)

Relative 2 (14-Bit)

Relative 3 (14-Bit)

See below 1*

Value indication: 

On/Off

NRPN

(Non Registered 

Parameter Number)

1-16

NRPN Parameter 

Number

Min. value: 

0-127/16383

Max. value: 

0-127/16383

Absolute

Absolute (14-Bit)

Relative 1

Relative 2

Relative 3

Relative 1 (14-Bit)

Relative 2 (14-Bit)

Relative 3 (14-Bit)

Inc/Dec

See below 1*

Value indication: 

On/Off

PITCH BEND

1-16

—

Range 0-127

—

—

See below 1*

Value indication: 

On/Off

AFTER TOUCH

1-16

Key number 

0-127, ALL

(All = Channel 

Aftertouch)

Min. value: 

0-127

Max. value: 

0-127

—

See below 1*

Value indication: 

On/Off

GS/XG

1-16

Select GS/XG-Main 

Control-parameter 

with clear text 

indication

Min. value:

0-127"

Max. value:

0-127"

—

See below 1*

Value indication:

On/Off

1*) Controller option:

a) Push Encoders LED behaviour: Off, 1d (1 LED on), 1d- (1 LED on, but value 0 = LED off), 2d, 2d-, Bar,  
Bar-, Spread, Pan, Qual(ity 'Q'), Cut(off), Damp(ing)
b) Faders: Move, Pick-Up, Motor (only BCF2000)
c) Foot controller: Move, Pick-Up (only BCF2000)

Tab. 4.1: Assignment of the push encoders in EDIT mode (CONTINUOUS types)