Behringer Europower PMP1680S Owner's Manual

EUROPOWER PMP1680S/PMP980S/PMP960M User Manual

For stereo operation the POWER AMP switch  

(28) 

 of the PMP980S/PMP1680S 

must be set to its upper position (MAIN L/MAIN R). Outputs A and B deliver 

the stereo main signal to the P.A. speakers. Two active speakers, wired in 

parallel, are connected to the preamp monitor output. They are used as 

on-stage monitor speakers. The effects processors can be switched on and 

off with a dual footswitch. This set-up is not possible with the PMP960M 

(no stereo operation possible).

PMP1680S

2 x BEHRINGER EUROLIVE 

Stack (B1800X & B1220, both passive)

2 x BEHRINGER B215A (active)

PMP1680S Front Panel
(excerpt)

Dual footswitch

Fig. 5.1: EUROPOWER mixer as a stereo amplifier (example)

Both the PMP980S/PMP1680S and the PMP960M can be set-up for dual mono 

operations. The POWER AMP switch  

(28) 

 must be set to its lower (PMP960M) 

or center position (PMP980S/PMP1680S). The two loudspeaker outputs 

provide the main and monitor signals independently of each other and to two 

loudspeakers each, which are wired in parallel.

PMP960M Rear Panel

(excerpt)

2 x BEHRINGER 

EUROLIVE F1520

(passive)

2 x BEHRINGER EUROLIVE B1520

(passive)

Fig. 5.2: EUROPOWER as a dual mono amplifier (example)