Bravetti F1068H User Manual

Do not put solid shortening in 

the oil container or the frying basket.
• If using solid vegetable shortening, 

melt it first in a separate pan and then 

very carefully pour the melted fat into 

the oil container.

• Previously used solid vegetable 

shortening which has curdled and 

hardened in the oil container should be 

removed from the oil container and 

melted in a separate pan before 

reusing.

If you try to melt the solidified 

fat in the oil container, there is a risk of 

warm melted fat suddenly sputtering from 

below through the still solid top layer of 

fat.  

Therefore use only the following 

procedure:

• Make sure the fat is at room 

temperature.  If the fat is very cold, 

there is a greater risk of splashing.

• Using a fork, carefully make some 

holes in the fat.  Make sure the lid is 

securely closed while fat is melting. 

Press the  "Function" Reset  button 

and press timer button to set the time 

you require.

• Lift up the control panel with heating 

element.

• Insert the “guide edges" on the 

control panel into the “guide rails" 

mounted on the metal body. (Fig. 3)

• Slide the “guide edges" down till the 

end.

Never plug in the deep fryer 

before filling with oil to specified level.  

Always make sure control panel is securely 

in place in the body and the heating 

element  is inside the oil in the container 

before plugging in.

Ensure the control panel is 

fitted correctly to the main unit otherwise 

the unit will not function.  This is not a 

defect.  This product is fitted with a safety  

switch to prevent the unit from turning on 

accidentally.

The automatic 

safety switch ensures that the unit will not 

operate unless the control panel has been 

inserted into the “guide rails" on the metal 

body correctly. (Fig. 4)

Never plug in the deep fryer 

before filling with oil. (See "Filling" 

instructions on page 4.) Always unplug 

the appliance when not in use. 
• Make sure the oil level in the oil 

container is between the "minimum“ and 

"maximum" lines inside the oil 

container.

• The frying basket should not be 

immersed in the oil during the pre-

heating.

• Replace the lid cover.

• Plug the appliance into a 120-volt 

outlet. The unit will beep.

• Press the power button.  The unit will 

beep and the power indicator light 

will come on. It’s showing that the 

power on. The upper screen display 

320 

°F and the lower screen displays 

_ _: _ _ . It’s in constant boiling status. 

• Set the required temperature – The 

temperature is adjustable from 155 

°F 

to 385 

°F in 5ºF increments. If you 

want to elevate the temperature, press 

the “+” button. When you press the “+”

button the unit will beep. If you want to 

lower the temperature, press the “-”

button. When you press the “-” button 

the unit  will beep and the upper screen 

will display the temperature that you set. 

When the set temperature is reached, 

the green ready indicator light come on.

(Fig. 5)

• Timer: The MAX timer time is 15 

minutes. If you want to add time, please 

press "+"  button. If you want  to 

subtract time, press "-" button. The 

lower screen will display the time that 

you set.

• Function Reset : If you press the 

function reset button, the unit is in 

default status. The default temperature 

is 320 

°F and the default time is 00:00.

9. 

Function Reset Button

10. Power Button
11. / 12. Timer Adjustable Button
13. / 14. Temperature Adjustable Button

15. Digital Display
16. Ready Indicator Light (green)
17. Power Indicator Light (red)