Bravetti EP85 User Manual

 
 
 

 

 

 

• 

: Never plug in the control part when it is not installed in the fryer  

      body with heating element in the oil container.  Do not immerse  
       the control part, cord or plug in water.

Read all the sections of this booklet and follow all the instructions 
carefully. 

• 

Open the lid by pressing up on the lid opening  
latch (#10).  Fig. 1 

 

• 

Remove any printed documents from the basket. 

 

• 

Make sure the basket lifting knob (#9) is installed 
correctly.  (It may come out of place while in transit.) 

 

• 

Rotate knob while pressing with some force until flat part of socket fits 
over the flat of the post and the knob can be pushed in all the way. If 
knob is not fully inserted, it will come out easily and it might be difficult to 
lower and raise the basket. 

Fig. 1 

Prior to First Use, Clean the Unit Thoroughly  

 Always let the fryer cool completely for 1 ½ to 2 hours before  

       taking it apart for cleaning.  Never carry or move the Deep Fryer 
       with hot oil inside. Before cleaning, always make sure the plug  
       is not in the wall socket. 

•  Remove the lid (#12).  Slide the lid to the right, then remove by pushing 

back the right hand side. Fig. 2 

 

•  Turn basket lifting knob counter-clockwise to raise the frying basket (#5) 

to the up position.  Fig. 3 

 

• 

Release the basket handle (#2) from its storage place by pressing with 
your index finger. Fig.4 

Fig. 2 

Fig. 3 

Fig. 4 

•  Use basket handle (#2) to remove the frying basket (#5) Always make 

sure the basket handle is securely attached to the basket.  To attach the 
handle to the frying basket, insert the metal part of the handle inside the 
metal bracket on the frying basket.  Fig. 5 

 

• 

Pull out the basket lifting knob (#9). Fig. 6. 

 

• 

Lift the control part with heating element  (#6) out of its slots by pushing it 
up from the bottom with one hand while holding the body of the deep 
fryer with your other hand. Please note: Basket lifting knob (#9) must be 
removed before lifting out the control part (#6). Fig.7 

 

• 

Remove the oil container. If necessary, you may also remove the sealing 
ring (#4) by sliding it down from the oil container when cleaning. Fig. 8 

 

•  Clean the oil container (#3) and the frying basket (#5) with hot water, 

dishwashing liquid and a non-abrasive sponge. Never immerse the 
control part with heating element (#6) in water. 

 

•  Dry thoroughly, and place the oil container with sealing ring and the 

frying basket back in the fryer, making sure the basket is hanging 
securely on the oil container. 

 

•  Insert the basket lifting knob (#9) and make sure that turning it will lower 

or raise the frying basket (#5). 

 

• 

Wipe the inside of the lid and the outside of the fryer with a damp cloth. 
Install the lid.  

Fig. 5 

Fig. 6 

Fig. 7 

4 

5 

Fig. 8