Hunter Engineering Quick Tread Specification Sheet
Quick Check Drive Under with Quick Tread
Flush Mounted
PIT & CONDUIT SPECIFICATIONS
Quick Tread’s 3 in. underground
conduit must be routed to the
pedestal according to local
codes. The pedestal can be
placed on either side. Exact
placement of conduit will vary.
Refer to Form 6905-T.
Form 6898-T, 05-15a
Copyright © 2015, Hunter Engineering Company
END VIEW
SIDE VIEW
26 in.
93 in.
(7 ft. 9 in.)
36 to 96 in.
(3 ft. to 8 ft.)
51 in.
36 in.
26 in.
QUICK CHECK DIMENSIONS
QUICK TREAD DIMENSIONS
96 in. (8 ft.) is the
maximum distance
between the middle of the
pedestal and nearest edge
of Quick Tread. Any
further will reduce max
vehicle test entry speed.
5 in.
17 3/8 in.
5 in.
14 7/8 in.
PEDESTAL
34 1/2 in.
QUICK TREAD:
HUNTER
SUPPLIED
QUICK TREAD
SUB-STRUCTURE:
CONTRACTOR
SUPPLIED
8 in.
51 in.
46.25 in.
BAY FLOOR
12 in.
(min.)
88 in.
93 in.
45 1/4 in.
16 1/4 in.
24 1/2 in.
135 in.
(11 ft. 3 in.)
15 in.
WITHOUT
OPTIONAL
MONITOR
See 6429-T for
support structure
details. Mounting
plate dimensions
are provided to
aid fabrication.
32 in.
23 1/2 in.
67 1/4 in.
(5 ft. 7 1/4 in.)
18 in.
WITH
OPTIONAL
MONITOR
16 in.
WITHOUT
OPTIONAL
MONITOR
22 in.
WITH
OPTIONAL
MONITOR
SENSOR PROFILE
It is recommended that a
low clearance warning be
suspended at the entrance
of Drive Under Quick
Check
®
bays.