Bose Stereo Amplifier MR-J2S- B User Manual

Page of 172
3 -  24
3. SIGNALS AND WIRING
(2) Connection
Insert the core of the cable into the opening and tighten the screw with a flat-blade screwdriver so that
the cable does not come off. (Tightening torque: 0.5 to 0.6N m) Before inserting the cable into the
opening, make sure that the screw of the terminal is fully loose.
When using a cable of 1.5mm
2
 or less, two cables may be inserted into one opening.
To loosen.
To tighten.
Opening
Control circuit terminal block
Cable
Flat-blade screwdriver 
Tip thickness 0.4 to 0.6mm 
Overall width 2.5 to 3.5mm
3.10 Instructions for the 3M connector
When fabricating an encoder cable or the like, securely connect the shielded external conductor of the
cable to the ground plate as shown in this section and fix it to the connector shell.
External conductor
Sheath
External conductor
Pull back the external conductor to cover the sheath
Sheath
Core
Strip the sheath.
Screw
Screw
Ground plate
Cable