Bradley Brand Furniture COMBI5500 User Manual

17" Chase-Mounted Five-Sided Stainless Steel combination Unit

Installation Instructions

COMBI5500

Bradley Corporation • 215-329 Rev. J; EN 04-732C

6/28/04

VALVE MOUNTING

PLATE

(159-292)

1/2"-13 THREADED STUD
0"-4" WALL (109-039)
4"-8" WALL (109-040)
8"-12" WALL (109-048)

WASHER

(142-002AM)

NUT

(110-119)

MOUNTING

CHANNEL

(140-558)

Figure 2

Installation Instructions

continued . . .

Step 2: Mounting Unit to Wall

NOTE: Refer to Figure 2 when mounting unit. Unit is shown without valves and filler for clarity.

1. Insert six 1/2"-13 threaded studs (supplied by installer) into the back of the unit and screw in

approximately 1/2".

2. Connect the 1-1/2" flush valve supply pipe (supplied by installer) to the 1-1/2" NPT inlet half

coupling located on the back of the fixture.

3. Sliding studs and pipes through the wall openings, position the fixture in place (top of integral

toilet seat is 15" above finished floor).

4. Secure the fixture to the wall using anchor brackets, washers, and nuts provided.

NOTE: All fasteners must be securely tightened to approximately 30 ft./lbs.