Behringer Ultralink Pro MX882 User Manual

ULTRALINK PRO MX882 User Manual

3. Installation

Your BEHRINGER ULTRALINK PRO was carefully packed in the factory and

the packaging was designed to protect the unit from rough handling.

Nevertheless, we recommend that you carefully examine the packaging and its

contents for any signs of physical damage, which may have occurred in transit.

◊

If the unit is damaged, please do not return it to us, but notify your
dealer and the shipping company immediately, otherwise claims for
damage or replacement may not be granted. Shipping claims must be
made by the consignee.

3.1 Rack mounting

The BEHRINGER ULTRALINK PRO fits into one standard 19" rack unit of space

(1 3/4"). Please allow at least an additional 4" depth for the connectors on the

back panel. Be sure that there is enough air space around the unit for cooling

and please do not place the ULTRALINK PRO on high temperature devices such as

power amplifiers etc. to avoid overheating.

3.2 Mains voltage

Before you connect your ULTRALINK PRO to the mains, please make

sure that your local voltage matches the voltage required by the

unit! The fuse holder on the female mains connector has 3 triangular markers,

with two of these triangles opposing each other. Your ULTRALINK PRO is set to

the operating voltage printed next to these markers, and can be set to another

voltage by turning the fuse holder by 180°. CAUTION: this instruction

does not apply to export models exclusively designed, e.g. for

115 V operation!

3.3 Audio connections

The audio inputs and outputs on the BEHRINGER ULTRALINK PRO are fully

balanced. If possible, connect the unit to other devices in a balanced

configuration to allow for maximum interference immunity.

output

For unbalanced use, pin 1 and pin 3

have to be bridged

1 = ground/shield

2 = hot (+ve)

3 = cold (-ve)

input

Balanced use with XLR connectors

Fig. 3.1: Different plug types

◊

Please ensure that only qualified persons install and operate the
ULTRALINK PRO. During installation and operation the user must have
sufficient electrical contact to earth. Electrostatic charges might affect
the operation of the ULTRALINK PRO!

strain relief clamp

sleeve

tip

sleeve

(ground/shield)

Unbalanced ¼" TS connector

tip

(signal)

strain relief clamp
sleeve
ring
tip

sleeve

ground/shield

For connection of balanced and unbalanced plugs,

ring and sleeve have to be bridged at the stereo plug.

Balanced ¼" TRS connector

ring

cold (-ve)
tip

hot (+ve)