Bühler 2895 User Manual

bühler 

 

 

Allied Front-End Loader 

- 25 - 

P4410     

Escaping fluid under pressure can 

have sufficient force to penetrate the skin, causing 
serious personal injury.  Before repairing, adjusting, or 
disconnecting lines, be sure to relieve all pressure. 

Before applying pressure to the system, be sure all 
connections are tight and the lines, pipes, and hoses are 
not damaged. 

Wear proper hand and eye protection when searching for 
leaks.  Use a piece of wood or cardboard instead of hand 
to check for leaks. 

Maintain all components in good working order. 

If injured by escaping fluid, see a doctor at once.  Serious 
infection or toxic reaction can develop if proper medical 
treatment is not administered immediately. 

With loader attachment on the ground, check and add if necessary the approved 
hydraulic fluid.  Refer to the Tractor Manual for proper inspection of fluid level, oil 
type and service intervals.    Visually check hoses and fittings for leaks and 
damage on a daily bases.  Ensure hoses do not bind or stretch during operation.  
Always keep hoses tied or supported to prevent rubbing against sharp areas or 
being pinched.  We suggest using tie wraps to support hoses.  Hoses routed 
from steel lines to cylinders should be in a relaxed position.  To correct, loosen 
swivel end of hose and retighten.

Never operate the loader with frayed or damaged hoses 

or leaking fittings.  A burst would cause the loader to drop suddenly and result in 
serious injury or death and cause damage to the loader or tractor. 

Replacement hoses must be equal to a working pressure of 3000 P.S.I. or 
higher.