Wayne-Dalton Z-Wave WDSF-10 User Manual

Z-Wave

Network Setup

Plug in lamp

or appliance

Use CHANGe LoCATIoN link to set
your physical location.

Use the following procedure to setup your

Z-Wave

network with the Wayne-Dalton USB

Z-Wave

Adapter as your primary controller.

Setting up your network refers to assigning

Z-Wave

modules to the USB

Z-Wave

Adapter’s network. All modules

must be assigned to the Z-Wave

USB

Adapter’s network before any configuration

or control functions can be accomplished.

Note: Devices, such as lamps and appliances,

should be plugged into a Z-Wave

module

before adding them to the network.

Note: If you are adding the Z-Wave

USB

Adapter to an existing network, please see

the section titled “Joining ThinkEssentials to

an Existing Network” on page 22.

Continued next page...

Use the following procedure to initially setup

your ThinkEssentials

software.

1. Find the icon on your desktop, or find the

link in your Start Menu (Programs), entitled

Thinkessentials

and double-click it to get it

started.
2. When prompted for the license key, simply

enter this number or code and then press the

“Activate” button. The license key for your

software is printed on a sticker on the back of

the CD jacket accompanying the CD.
3. Select the location nearest you, by first

selecting your country, then state/province and

then your city. If your city does not appear in the

list, select the city nearest you instead.
Note: Your location is used to program sunrise

and sunset times. It may be changed at any time

by choosing CHANGe LoCATIoN in the SeTTINGS

tab.

ThinkEssentials

Setup

Installation/Setup

example of

a Z-Wave

module

Thinkessentials

icon



DIM