Suunto Wristop Computer X10 User Manual

8

Charging the battery with a mains charger
To charge the battery with a mains charger:
1. Plug the charger into the mains outlet and attach its data clip firmly to your Suunto 

X10.

2. When the battery level indicator is full, disconnect the charger from the mains outlet. 

Your Suunto X10 is now ready for use. 

Charging the battery through your PCs USB 
connector
To charge the battery through your PC’s USB 
connector:
1. When your PC is on, plug the USB cable into 

the USB port and attach its data clip firmly to 
your Suunto X10.

2. When the battery level indicator is full, 

disconnect the charger from the mains outlet. 
Your Suunto X10 is now ready for use. 

2.1.1. Mode indicator
On the left side of the display there is a mode indicator that shows you the currently 
active mode. The mode indicator displays the modes from the top down in the 
following order: TIME, ALTI/BARO, COMPASS, NAVIGATION and ACTIVITY. The 
active mode is indicated by the moving segment next to the indicator bar.

2.1.2. Battery level Indicator
On the right side of the display there is a battery level indicator. When the indicator is 
in the red zone, the battery needs recharging. When the battery is being recharged, 
the indicator moves up continuously until the battery is full and the indicator is shown 
in full length.