Suunto X9 Instruction Manual

58

3.6.6. Track back (track log)
You can use the Activity mode’s Track Back function to navigate along any track log 
file found in the memory. Suunto X9 will guide you to the nearest waypoint and from 
there to the starting location, or to the finish if you so choose.
To activate the Track Back function:
1. In the Set menu, select 

 as the Activity option. This starts storing data in a log file 

for the Track Back function.

2. Wait until the GPS acquires a connection. 
3.In the Set menu, select Memory with UP/DOWN and press 
ENTER.
4.Select the desired log file with UP/DOWN and press 
ENTER. 
5.Select Track Back with UP/DOWN and press ENTER. The 
message ‘

START

 

TRACK

 

BACK

?’ is displayed. If the message 

‘

START

 

LOG

’ is displayed, check that the activity is set to 

and that the unit has received the first satellite fix.

6. Press ENTER to confirm the selection. Suunto X9 takes you back to the Activity 

display and activates the navigation. It will first guide you to the nearest waypoint 
and from there to the starting location. The Track Back works just like the 
navigation, with the exception that you cannot view additional data displays. ‘

TRACK

 

BACK

’

 is displayed on the top row.

you set the function in the Activity mode. 
7.To stop the Track Back navigation, choose

as the 

navigation option,

as the activity option or turn off the 

GPS.
NOTE: To view the total distance to the starting location,