Sprint Nextel SP-809 User Manual
18
Preparation
2
The TAD prompts you to press
REPEAT/SCAN
or
SKIP/
SCAN
to select announcement A, B, or AO. The selected an-
nouncement name appears (
A
,
b
, or
AO
).
3
Press
CHANGE
then
ANNC
.
4
Speak your message from about 8 inches in front of the TAD.
5
When you finish, press
STOP
. The TAD beeps and plays back
the announcement.
Checking the Announcement
To hear the currently-selected announcement, press
ANNC
at any
time.
AP
(announcement playing) appears and the message plays.
If you hear “No announcement” when you press
ANNC
, that means
the TAD is set to announce only, but there is no answer-only mes-
sage recorded.
sage recorded.
If you hear “Hello. Please leave a message after the tone” that
means the TAD is set to announcement A or B but you have not
recorded an announcement.
means the TAD is set to announcement A or B but you have not
recorded an announcement.
Changing Your Recorded Announcement
To change your recorded announcement, record a new announce-
ment over the existing one.
ment over the existing one.
CHANGE
ANNC
43-5809.fm Page 18 Wednesday, August 18, 1999 1:43 PM