Spectrum Brands TELEMATRIX SP-400 User Manual

 

The SpectrumPLUS

TM

 was designed to be conveniently 

wall mounted without requiring additional hardware. 
 
Follow these easy steps: 

 

1.The handset retaining clip must be in the correct    
position  to  secure the handset into the handset cradle. 
To engage the clip, pull the clip forward (outward) with 
your fingers, rotate the clip 180º and snap the clip back 
into place (figure 1). The retaining clip cannot be     
removed because it is spring loaded.  

2. The SpectrumPLUS

TM

 has provisions for a mounting 

wedge that must be  correctly positioned.  This    wedge 
allows the telephone to  be viewed at  a correct angle 
when the phone is wall mounted.  Remove the wedge 
from the phone base (figure 2).  
 
3. Secure the w iring in place prior to installing the wall 
mount wedge. The wall mount base has extra large   
wiring channels and strain relief poles for containing 
the wires in a neat and orderly way. Wrap the wires 
around the strain relief poles and then secure the wires 
through the channel. 
 
4. To wall mount, place the narrow edge at the top edge 
of the phone base  and  slide the wedge upward into 
place (figure 3).  
 
5. Lock the wall mount into position by sliding the 
locking button to the right (figure 4). 

Retaining Clip 

figure 1 

figure 2 

Remove Mounting Wedge 

figure3 

Replace Mounting Wedge 

figure 4 

Lock Mounting Wedge 

1.     UNSNAP
2.     ROTATE 180  .
3.     SNAP INTO PLACE.

Mounting Wedge

Spectrum Plus Bottom

Mounting Wedge

Spectrum Plus Bottom

Mounting Wedge

Spectrum Plus Bottom

Lock mounting wedge

To install the wedge for desk  mounting, be sure the lock mechanism is positioned to the left clear of the 
locking arm. Place the wedge in the slots, wide end toward top of phone base unit, and slide the wedge 
upward into position. Lock the wedge into place. 

CLIP IS SPRING LOADED 

PULL OUTWARD