Sony VAIO VGF-HS1 User Manual

11

 

VGF-HS1   3-98-361-11(1)

 Hardware connection and setup

To prevent failures and damage, do not place your Home Server in a location subject to:



  Direct sunlight



  Magnetic sources



  Heat sources, such as heaters



  Excessive dust



  High humidity



  Poor ventilation

Keep the following in mind to place your Home Server.

Be sure to hold your Home Server on 

both sides to lift.

Do not apply strong shock to your 

Home Server when placing.

.0 inches

 (.0 cm)

Allow clearance of at least .0 inches 

(.0 cm) wide on either side of your 

Home Server.

Keep the air-intake vents on the 

bottom, the sides, and the back of 

your Home Server unblocked. 

Place the Home Server on a flat, 

solid surface so as to let the air flow 

under the bottom of the Home 

Server.

.0 inches

 (.0 cm)

Rear (unblocked)

.0 inches

 (.0 cm)

.0 inches

 (.0 cm)

Be sure to provide adequate air 

circulation around your Home 

Server to prevent internal heat from 

building up, as it will cause your 

Home Server to malfunction or 

result in a fire. Keep the cooling fan 

on the back and the air-exhaust 

vents on the sides and the bottom 

unblocked to let the air flow out.