Raritan Computer Calculator PMG-0I-v2.0.3-E User Manual

C

HAPTER 

2:

 

O

PERATION

 

35 

3.  The Paragon Update dialog appears. 

 

4.  If the device(s) intended to upgrade are listed in the dialog, go to Step 5. If not, click New to 

add the device(s) and click each field to enter or select the appropriate data, which is 
explained below:  
 
Depending on the manner in which the computer running Paragon Manager is connect to the 
desired devices, you may update the firmware through the network or the RS-232 connection. 
For example, updating a Paragon I switch requires the RS-232 connection, and updating a 
Paragon II switch requires the network connection. 
 

Name 

Type the name of the desired KVM switch or user station. 

IP Address/Serial 

•  Network connection: Type the IP address of the Paragon 

switch. 

•  RS-232 connection: Choose <Default Serial> from the 

drop-down list. 

Port 

•  Network connection: Type the number of the appropriate 

network port. This setting must be the same as the port 
setting on the OSUI of the Paragon switch. The factory 
default port is 3000. 

•  RS-232 connection: Type the number of the serial port 

(COM port) that is connected to the desired KVM switch or 
user station. 

Encryption Key 

•  Network connection: If you have assigned encryption keys 

for the Paragon switch in the OSUI’s network setting, you 
must type the same encryption keys here. Otherwise, both of 
the connection and firmware upgrade will fail. If there are 
no encryption keys, choose <Default No Encryption>. 

•  RS-232 connection: Always choose <Default No 

Encryption>.