ZTE ZXDSL 831 User Manual
ZXDSL 831/831B/831II/831BII User’s Manual
8
Rear panel
Figure 3.1-2 Rear Panel of the ZXDSL 831/831B/831II/831BII
Table 3.1-2 Description of Interfaces on the Rear Panel
Item
Introduction
DSL
RJ-11 connection interface: The equipment is connected to the ADSL line or
splitter via the telephone line.
splitter via the telephone line.
Reset
In the power-on state, you can restore the system to the default configuration
by using a thin needle to press this slot for three seconds or for three
executive times.
by using a thin needle to press this slot for three seconds or for three
executive times.
Ethernet
RJ-45 connection interface: Connect it to the PC computer or other network
devices using the network cable.
devices using the network cable.
Power switch
PWR
Power interface. Connect it to the power adapter.
3.2 Hardware Connection
Connection 1
The following connection method is recommended. Figure 3.2-1 shows the
connection between a ZXDSL 831/831B/831II/831BII, computer, splitter and
telephones.
connection between a ZXDSL 831/831B/831II/831BII, computer, splitter and
telephones.