Zhone 4929 DSLAM User Manual

22

4929 DSLAM Installation and User’s Guide

4929-A2-ZN20-30

3 Insert and tighten the screws in the top screw positions, then tighten the 

bottom screws. 

Wall mounting requires two wood screws suitable for the weight of the fully 
cabled unit. These are not included. Use at a minimum 1/4-inch (6 mm) 
diameter screws in 3/4-inch (19 mm) plywood (not drywall).

 

To install the DSLAM on a wall:

1 Identify the flat-head screws provided in the hardware kit and the brackets 

suitable for a 23-inch rack. Two screws are required for each bracket.

2 Lay the unit upside down on a flat surface.

3 Locate the pair of threaded holes on the right side of the unit. Attach a 

bracket using the flat-head screws.

05-17616

+

ACT

4929

+

LK

ACT

LK