Zhone 4821-A2 User Manual
Configuration
36
BitStorm 4800 Express Model 4821-A2 Installation Guide
4821-A2-ZN21-30
Using the CLI
A command line interface (CLI) can be used to configure and monitor the
unit. The CLI is available from a PC or terminal connected to the Console
port, or from a Telnet session with the device.
unit. The CLI is available from a PC or terminal connected to the Console
port, or from a Telnet session with the device.
The following commands are available:
Descriptions of some essential configuration commands follow.
Table 4:
CLI Commands
Command
Function
clear
Clear the system log.
configure
Enter Configuration mode.
copy
Copy from one file to another.
date
Set the time zone and date format.
end
If user is in Administrator mode, shifts to User mode; if
user is in User mode, positions interface at top of menu
tree.
exit
Terminate current session.
firmware
Download or apply new firmware.
paging
Enable or disable paging (more prompt) for this
session.
privilege
Enable administrator mode.
restart
Restart a unit.
show
Display configuration, statistics, and status.
technical-support
Display information for contacting technical support.
test
Test the system.