Vincent Audio CD-S6MK User Manual

Basic troubleshooting of a CD player is similar to troubleshooting any other electronic 

equipment. 

Always check the most obvious possible causes first.

To give you a few ideas of what to look for, check the following:

No power when POWER is 
pressed

Power plug not inserted 
securely.

Plug in securely.

Disc dirty.

Clean disc surface.

No playback when disc is 
loaded

Disc loaded upside down.

Load with label side up.

Misoperation of amplifier.

Check amplifier's control/switch 
setting.

No sound(or too low level 
output)

Connections are made 
incorrectly or imperfectly.

Check connections.

Play starts when power is 
switched ON

A disc has been left in the player.

Remove the disc.

PLAY(      )button not pressed.

Program playback impossible

PGM button not pressed.

Press PGM so "PROGRAM"
Indicator lights.

Disc dirty.

Clean disc surface.

Mistracking (sound jumping)

The unit is subject to vibrations
or shocks.

Change the installation position.

HUM

Connection cord not connected 
securely.

Re-connect plug securely.

Remote control operation 
impossible

No battery installed in remote 
control unit.

Insert batteries.

POWER switch of the unit is 
set to OFF.

Turn switch to ON.

Batteries in the remote control 
unit are exhausted.

Replace with new ones.

Press PLAY(       )button.