Vestax Professional Mixing Controller PCV-002 User Manual

角4点のネジを外す。

マルチケーブル
コネクターを抜く

6

■HOW TO REMOVE THE TOP PANEL

○

Remove all fader knobs and the 4screws which

fix the top panel.(see fig.A)

○

Remove the top panel.

■HOW TO CHANGE THE FADER UNIT

○

Remove the screws on the fader panel.(see fig.B)

○

Remove the fader unit from position in mixer.

○

Carefully remove the multi-cable connector from
fader unit.(see fig.C)

○

Attach multi-cable connector to new fader unit.

○

Position the fader unit carefully and secure with
screws.

You can replace the CF unit with "CF-RUS",

"CF-R" or "CF-PCV".

■HOW TO REPLACE THE CF UNIT WITH "CF-PCV"

When the fader unit is replaced,  please see fig.C.

Place the fader unit in the proper position and fix it

with two screws.(fig.D-○

b

)

How to change the fader unit.

driver

driver

fig.D

CF-RUS or CF-R
CF-PCV

fig.A

fig.C

fig.B

Remove the multi-cable
connector from fader unit.

Remove four scews.

There is a swith for "CF-PCV" unit. When "CF-
PCV" unit is installed,  set the switch to "PCV"
mode.

When the fader unit is replaced,  do not loosen
the screws  with     marking.