USRobotics 9630 User Manual

Cordless Skype Dual Phone 

User Guide

55

Basic Procedure

This procedure addresses a number of symptoms that you might experience with your handset:

1. Verify that the batteries are properly installed. The inside of the battery case has a picture showing the proper 

positions for the batteries.

2. Check the battery indicator to be sure that the batteries have been charged. If you are charging the batteries 

for the first time, charge them for 14 hours.

3. Verify that the USB and phone cables are connected properly.

4. Ensure that the power outlet to which the base station is connected is a live outlet.

5. Verify that your handset is registered with the base station. If the phone is not registered, the handset dis-

plays UNREGISTERED. To register the handset with the base station, follow the instructions in 

6. Ensure that the handset is within the base station’s cordless range by moving closer to the base station.

7. Ensure that the handset is turned on.

Specific Problems

If following the basic procedure above does not help get your phone working, find the procedure below whose 
description best matches the symptom that you are observing.

1. Verify that the battery icon is scrolling while the handset is on the charger. If the icon is not scrolling, reseat 

the handset in the charger.

2. Contact your dealer to replace the rechargeable batteries.

If the handset is turned off, it will not beep when you place it on the charger. If the handset is turned on and it 
does not beep:

Note:This phone does not work during a power failure.