Uniden APPCAM25HD Owner's Manual
10
NETWORK SETUP AND CAMERA INSTALLATION
OVERVIEW
There are two methods of connecting the AppCam 25HD cameras to your
mobile device. One method is wireless and the other method has the camera
connected directly to the router using the provided microSD to Ethernet cable.
The add camera procedures themselves are identical. In the setup procedures
that follow, the wired connection instructions are noted where applicable.
mobile device. One method is wireless and the other method has the camera
connected directly to the router using the provided microSD to Ethernet cable.
The add camera procedures themselves are identical. In the setup procedures
that follow, the wired connection instructions are noted where applicable.
PREREQUISITES
•
Your router must support WEP/WPA/WPA2 security and it must be turned
on.
on.
•
You must have an available WiFi-enabled mobile device (Android or iOS
smartphone/tablet).
smartphone/tablet).
•
The AppCam 25HD and your mobile device must connect to the same Wi-Fi
router for setup.
router for setup.
STEP 1 – SET UP CAMERA AND SMARTPHONE/TABLET
1. Download the Uniden® AppCam™ app from the Apple iTunes
store (iOS) or Google Play (Android) onto your device.
2. Connect the antenna to the camera. You can attach the camera
stand to the camera as well but it is not necessary. Procedures for mounting
the AppCam 25HD stand and attaching the camera are provided later.
3. Wireless Setup - Connect the camera to power After about 45 seconds,
the red LED is steady on and the green LED begins to flash (3-flash/pause
pattern), indicating that the camera is in Pairing mode.
Wired Setup - Connect the camera to your router using the microUSB