XiNCOM X16-R User Manual

Page of 82
 
 
Page 52 
Session Limit 
This new feature allows to drop the new sessions from both WAN and LAN side, if the number of 
new sessions exceeds the maximum value set by you in the Sampling Time field.  
 
 Figure 5-3: Session Limit 
 
 
Settings – Session Limit 
Sampling Time 
The time interval specified by you for new sessions. Only the new 
sessions that have recently occurred are counted according to the 
sampling time entered. (Default is 400 mil-sec) 
Maximum of Total New 
session 
The maximum total number of new sessions in the system which is 
acceptable in the sampling time. Any new incoming sessions will be 
dropped after the number of new sessions has been exceeded. 
(Default: 65535 session/sec) 
Maximum of New 
Sessions for Host  
The maximum number of new sessions from the host which is 
acceptable in the sampling time. Any new incoming sessions will be 
dropped from this host after the number of new sessions has been 
exceeded. (Default: 100 session/sec) 
Maximum of Dropped 
New Sessions for Host 
If the number of dropped new sessions from the host exceeds the 
Maximum in the sampling time, any new session from the host will be 
dropped in the pause time period. (Default: 25 session/sec) 
Pause Time for Host 
while exceeding limit 
on Dropped New 
Sessions 
Within the pause time period, new session from the suspended host will 
not be served by the system when the number of dropped new 
sessions exceeds the defined Maximum. (Default is 5 minutes)