Symbol Technologies Symbol AP-5131 User Manual

4-27

4.

Click 

 to save any changes to the SNMP Trap Configuration screen. Navigating away 

from the screen without clicking the Apply button results in all changes to the screen being 
lost.

5.

Click 

 (if necessary) to undo any changes made. Undo Changes reverts the 

settings displayed on SNMP Trap Configuration screen to the last saved configuration.

6.

Click

to securely exit the AP-5131 Symbol Access Point applet. A prompt displays 

confirming the logout before the applet is closed.

Click 

to create a new SNMP v3 Trap Configuration entry.

Select 

to remove an entry for an SNMP v3 user.

Specify a 

numerical (non DNS name) 

destination IP address for 

receiving the traps sent by the 

AP-5131

 SNMP agent.

Specify a destination User Datagram Protocol (UDP) port for 
receiving traps. 

Enter a username specific to the SNMP-capable client receiving 
the traps.

Use the 

 drop-down menu to specify a security 

level of noAuth (no authorization), AuthNoPriv (authorization 
without privacy), or AuthPriv (authorization with privacy).

The “NoAuth” setting specifies no login authorization or encryption 
for the user. The “AuthNoPriv” setting requires login authorization, 
but no encryption. The “AuthPriv” setting requires login 
authorization and uses the Data Encryption Standard (DES).

Select 

 to display the 

 screen for 

specifying authentication and password settings for an SNMP v3 
user. The maximum password length is 11 characters. Use the 

 drop-down menu to specify 

 or 

 as the authentication algorithm. Use the Privacy Algorithm 

drop-down menu to define an algorithm of 

 or

.

If entering the same username on the SNMP Traps and SNMP 
Access screens, the password entered on the SNMP Traps page 
overwrites the password entered on the SNMP Access page. To 
avoid this problem, enter the same password on both pages.