Sun Lawn BTE-1 User Manual
Owner’s Manual — Sunlawn BTE-1
7
• The Sunlawn BTE-1 Lawn Trimmer is largely maintenance-free, but
should be cleaned after every use.
• Do not operate without the protective shield and always check to be
sure the air apertures do not become clogged. Remove any grass or
dirt with a dry cloth or brush.
dirt with a dry cloth or brush.
• Repairs should only be carried out by authorized Sunlawn dealers.
Store the lawn trimmer in a dry, frost-proof place. We recommend
that you hang up the trimmer to avoid damage to the cutting head on
the ground. Please do not store the trimmer where children have
access.
that you hang up the trimmer to avoid damage to the cutting head on
the ground. Please do not store the trimmer where children have
access.
REPLACING THE CORD CARTRIDGE
Never use metallic cutting elements, spare parts, or accessories which
are not approved by the manufacturer. Only use the replacement cord
cartridge recommended by the manufacturer, which is available from
Sunlawn dealers.
When all the trimming cord is gone, the cord cartridge (11) should be
replaced as follows:
are not approved by the manufacturer. Only use the replacement cord
cartridge recommended by the manufacturer, which is available from
Sunlawn dealers.
When all the trimming cord is gone, the cord cartridge (11) should be
replaced as follows:
1. Unplug the power connector cord from the battery pack.
MAINTENANCE / CARE / STORAGE
CAUTION
The battery pack must be removed from the unit when
the appliance is stored and when any maintenance
work or servicing is to be done.
To avoid the risk of damage to persons or property,
the trimmer should never be cleaned under running
water, especially not at high pressure
the appliance is stored and when any maintenance
work or servicing is to be done.
To avoid the risk of damage to persons or property,
the trimmer should never be cleaned under running
water, especially not at high pressure
!