StorageTek Lifecycle Director DB2 Manager 312564001 User Manual
168
DB2 Manager User Guide
StorageTek
Proprietary
Reason code
(hex)
Explanation
Action:
Refer to IBM documentation on the LOCASCB macro for a
description of the error. Take the appropriate corrective
action before continuing with DB2 Manager processing.
description of the error. Take the appropriate corrective
action before continuing with DB2 Manager processing.
0A00
A request has been unable to obtain exclusive access to the DB2
Manager control region scheduler lock within the time interval set in
the READTIMEOUT or WRITETIMEOUT initialization parameter
(depending on type of request).
Manager control region scheduler lock within the time interval set in
the READTIMEOUT or WRITETIMEOUT initialization parameter
(depending on type of request).
Action:
This condition normally indicates a problem with the
control region. Issue a series of operator summary
display commands (see page 51) to display the current
condition of the scheduler lock. If this indicates that it is
unlocked, re-try the request. If it is consistently locked,
review the control region joblog for other error messages.
If no reason for the error can be identified, report the
problem to your local DB2 Manager support
representative. To relieve the condition, perform an
immediate stop on the control region and restart the
region.
control region. Issue a series of operator summary
display commands (see page 51) to display the current
condition of the scheduler lock. If this indicates that it is
unlocked, re-try the request. If it is consistently locked,
review the control region joblog for other error messages.
If no reason for the error can be identified, report the
problem to your local DB2 Manager support
representative. To relieve the condition, perform an
immediate stop on the control region and restart the
region.
0B00
A migrated row has been accessed by the row migration utility
OTDBP100.
OTDBP100.
Action:
This is a normal condition when running an DB2 Manager
utility program, and will be handled by the program. This
error should not occur when executing any other type of
program.
utility program, and will be handled by the program. This
error should not occur when executing any other type of
program.
0C00
Field TCBUSER was not correctly initialized during DB2 Manager
utility processing. The utility job will terminate with an error.
utility processing. The utility job will terminate with an error.
Action:
This indicates an internal DB2 Manager error. Report the
problem to your local DB2 Manager support
representative.
problem to your local DB2 Manager support
representative.
0Dxx
A problem has occurred attempting to communicate with the DB2
Manager control region. The second byte of the reason code (‘xx’)
will contain a two-digit explanation code, as follows:
Manager control region. The second byte of the reason code (‘xx’)
will contain a two-digit explanation code, as follows:
01 - An invalid DB2 Manager communications table was found by the
row edit procedure OTDBP300.
Action: This indicates an internal error in DB2 Manager
processing. Stop and restart the control region to try to
clear the error condition. If this does not work, report the
problem to your local DB2 Manager support
representative.
clear the error condition. If this does not work, report the
problem to your local DB2 Manager support
representative.
02 - The name of the DB2 Manager control region held in the ASCB
addressed by the row edit procedure OTDBP300 does not
match that of the control region at start-up time.
match that of the control region at start-up time.
Action: This indicates an internal error in DB2 Manager