Solo USA 280 User Manual

MS 270, MS 270 C, MS 280, MS 280 C

:

Disengage the chain brake: Pull 
hand guard (9) towards the front 
handle.

:

Turn the guide bar so that the 
tensioning gear is facing you.

:

Fit the chain over the sprocket (10). 
The long collar screw (11) engages 
the hole in the tensioning gear. The 
heads of the two short collar screws 
locate in the guide bar slot.

:

Make sure the drive link tangs 
engage the bar groove (see arrow) 
and then rotate tensioning gear 
counterclockwise as far as stop.

:

Fit the chain sprocket cover so that 
the wingnut locates on the collar 
screw (11).

133BA032 KN

133BA033 KN

133BA034 KN

133BA035 KN