Siig 1X4 HDMI 1.3 CAT5E User Manual

If the HDTV shows video without audio, set audio

mode to stereo

Factory default setting is Pin#1 - OFF, Pin #2 OFF,

for 1080p with stereo

If you encounter unsolved audio/video output

problem during system installation, please set the

DIP switch to Pin #1 - OFF, Pin #2 - ON to enforce

720p with stereo output to check the system.  Also,

make sure to reset your HDMI sources to output

720p

Setting at this mode may cause compatibility issues

amongst different HDMI sources and displays.  If

you cannot get the audio and/or video output,

change the DIP switch setting to default mode or

safe mode to verify the functionality of the device

EDID learning mode - set Pin #1 - ON first then

connect the HDTV set to the HDMI In via HDMI

cable, wait for 20 seconds to complete the EDID

learning process.  To learn the EDID of another

HDTV, repeat the process.

Pin#1

Switch Position

Video

Description

Up to

1080p

Pin#2

Default mode

 - up to 1080p & stereo

audio output for most HDTVs

Safe Mode

 - enforce 720p/1080i video

& stereo audio output for basic

compatibility among HDTVs

Stereo

EDID Learning

 - learning EDID from

the display while playing any received

HDMI audio format

OFF

Bypass

Audio

OFF

OFF

OFF

ON

ON

ON

ON

Up to

720/1080p

Bypass

Stereo

Bypass

Stereo

EDID Learning

 & Stereo - learning

EDID from the display & enforcing

stereo output