Shiro ADSL 2/2+ Ethernet Modem User Manual

User Manual 

Page 37

 

of 92 

LAN 

The router is preconfigured to automatically provide an IP address to each Ethernet device connected 

in the local area network (LAN). However, if you are familiar with your network setup, you can manually 
configure the LAN settings. 

LAN Configuration 

Your router’s default IP address and subnet mask are 192.168.1.1 and 255.255.255.0, respectively. 

This subnet mask allows the router to support 254 users. If you want to support more users, you need 

to edit the subnet mask but remember that the DHCP server function can only provide up to 255 IP 

addresses. If you change your gateways’ IP address and you have DHCP enabled, the DHCP 

configuration must reside within the same subnet. The default gateway is the routing device used to 

forward all traffic that is not addressed to a station within the local subnet. Your ISP will provide you 
with the default gateway Address.