Shiro ADSL 2/2+ Ethernet Modem User Manual

User Manual 

Page 52

 

of 92 

Bridge Filters 

The Bridge Filters allows you to enable, add, edit, or delete the filter rules. When bridge filtering is 

enabled, each frame is examined against every defined filter rule in sequence. When a match is found, 

the appropriate filtering action (allow or deny) is performed. Up to 20 filter rules are supported with 
bridge filtering. 

 

To configure Bridge Filters: 

1. From the Advanced Menu, select Application > Bridge Filters. This opens the Bridge Filters 

page. 

2. Check 

Enable Bridge Filters. 

3.  To add a rule, enter Src MAC address, Src Port, Dest MAC address, Dest Port, Protocol, 

and Mode, then click Add. 

Note: You can also edit a rule that you created using the Edit checkbox. You can delete using 

Delete. 

 

4. Click 

Submit to temporarily activate the settings. 

5.  To make changes permanent, click Save Settings.