Shiro ADSL 2/2+ Ethernet Modem User Manual
User Manual
Page 60
of 92
Layer 2
Layer 2 allows you to map an incoming packet with VLAN priority to CoS. This feature is only
configurable on the WAN interfaces as VLAN is only supported on the WAN side in the current software
release.
release.
Layer 2
Field
Description
Interface
Select the WAN interface here to configure the CoS for incoming traffic. Only WAN interface can
be selected as VLAN is currently supported only on the WAN side.
be selected as VLAN is currently supported only on the WAN side.
Class of Service
The selections are (in the order of descending priority): CoS1, CoS2, CoS3, CoS4, CoS5, and
CoS6.
CoS6.
User Priority
The selections are 0, 1, 2, 3, 4, 5, 6, and 7.
To access Ingress Layer 2:
From the Advanced Menu, select QoS > Ingress.