Sangean Electronics Sangean RCR-10 User Manual

13

Using the AC power adaptor
The AC power adaptor required for this unit should be 9 volts AC
at 1.4A.

Insert the adaptor plug into the AC socket on the rear of the radio.
Plug the adaptor into a standard mains socket outlet.

The AC adaptor should be disconnected from the main supply when not
in use.

Backup battery operation (for US version only)
1. Remove the battery cover on the bottom of the unit.

2. Insert two UM-3 (AA size) batteries into the spaces in
    the compartment.

3. Take care to ensure all batteries are inserted with correct polarity as
    shown inside the compartment. Replace the battery cover.

4. When the low battery capacity indicator shows on the display please
    replace the batteries immediately.

5. When the radio is used as clock radio or as an alarm, please always
    keep the batteries inserted.