Rose electronic CATx User Manual

 

 

VIEWLINK CATX INSTALLATION AND OPERATIONS MANUAL

 

3 

 

 
„  Available in models to connect to computers with PS/2 keyboard and 

mouse ports, computers with USB keyboard and mouse ports,  or KVM 
switches with DB25F KVM ports 

„  Extend a KVM station from a CPU using a single CATx cable 
„  Resolution :  1600 x 1200 (up to 200 feet, 60m) 

 

1280 x 1024 (up to 300 feet, 90m) 

 

1024 x  768  (up to1000 feet, 300m) 

„  ViewLink CATx uses a microprocessor to emulate the keyboard and 

mouse for plug and play operation. The keyboard and mouse on the 
receiver Unit do not have to be connected for the PC to boot; only the 
transmitter Unit must be connected to the PC 

„  Compatible with Rose Electronics family of KVM switches such as 

ServeView Pro, UltraView Pro and UltraMatrix 

„  Operating system independent 
„  Status indicator LEDs on each RJ45 connector 
„  All settings and video tuning are performed automatically.  No user 

adjustments are needed to achieve a crystal clear display on the receiver 
KVM monitor. (Manual adjustments are available using special keyboard 
commands) 

The package contents consist of the following: 
„  The ViewLink CATx transmitter and receiver units as ordered 
„  Power adapter for receiver Unit 

„ 

Installation and operations manual

 

 

CATx and other cables are usually ordered separately.  If the package 
contents are not correct, contact Rose Electronics or your reseller, so the 
problem can be quickly resolved. 

 

Visit out web site at www.rose.com for additional information on the ViewLink 
CATx and other products that are designed for data center applications, 
classroom environments and other applications.

 

This manual covers the installation and operation of the ViewLink CATx 
models.