Remington REMJ70 User Manual

8

102961

1. Turn ON/OFF switch to “OFF.”
2. Unplug power cord from outlet.

1. Wait 2 minutes after stopping heater.
2. Repeat steps under To Start Heater, page 7.

Note:

If shipping, transport companies require fuel tanks to be empty.

1. Drain fuel tank by removing drain plug on underside of fuel tank.
2. Replace drain plug.
3. If any debris is noted in old fuel, add 1 or 2 quarts of clean kerosene to tank, stir,

and drain again. This will prevent excess debris from clogging filters during
future use.

4. Replace drain plug. Properly dispose of old and dirty fuel. Check with local

automotive service stations that recycle oil.

5. If storing, store heater in dry place. Make sure storage place is free of dust and

corrosive fumes.

IMPORTANT:

 Do not store kerosene over summer months for use during next

heating season. Using old fuel could damage heater.

Fuel tank

Flush every 150-200 hours

See Storing, Transporting, or

   of operation or as needed.

  Shipping, above.

Air output and

Replace every 500 hours of

See Air Output, Air Intake,

   lint filters operation or once

   and Lint Filters, page 12.

   a year.

Air intake

Wash and dry with soap and

See Air Output, Air Intake,

filter

   water every 500 hours of

   and Lint Filters, page 12.

   operation or as needed.

Fuel filter

Clean twice a heating season

See Fuel Filter, pages 10

   or as needed.

   and 11.

Spark plug

Clean and regap every 600

See Spark Plug, page 11.

   hours operation or replace
   as needed.

Fan blades

Clean every season or as needed.

See Fan, page 15.

Motor

Not required/permanently
   lubricated