Promise Technology SuperTrak EX4650 User Manual
SuperTrak EX4650, EX4650A, EX8650, EX8650A Quick Start Guide
4
Step 2: Installing the SuperTrak Card
The SuperTrak EX Controller card fits into any available 3.3-volt PCI-Express X8
slot. You can also plug the SuperTrak card into a PCI-Express X16 slot.
slot. You can also plug the SuperTrak card into a PCI-Express X16 slot.
1.
Remove the cover of your PC or enclosure.
2.
Remove the inside slot cover of an available PCI-Express slot on the
motherboard.
motherboard.
3.
Install the SuperTrak card into the open PCI-Express slot.
4.
Fasten the SuperTrak card bracket to the PC or enclosure case.
5.
Attach one end of a SAS multi-lane cable to a SAS port on the SuperTrak
card.
card.
See Figures 1 through 4.
Note
The SuperTrak EX Controller cards are PCI Plug-n-Play (PnP)
devices. No changes are necessary in the motherboard CMOS/
BIOS Setup for resources or drive types in most applications.
devices. No changes are necessary in the motherboard CMOS/
BIOS Setup for resources or drive types in most applications.