Primera Technology 810 Leaflet

The LX-Rewinder is used in conjunction with Primera’s
LX Series Label Printers to rewind printed labels back
onto a roll. The “rewind” and “unwind” functions allow
for a flawless operation with no additional cables
required.

A roller guide arm detects the tension of label materials
and starts a linear movement onto a rewinding roll.
Should the tension be too tight, the guide will
automatically rise allowing the rewinding roll to unwind
so that the ideal tension can again be established. The
LX-Rewinder also has an adjustable speed control which
regulates the rewinding speed.

This will ensure that the print quality is not
compromised by too much tension or incorrect speed.

In addition, the LX-Rewinder supports the “out of label”
error. In this case, the guide arm falls to the bottom and

an acoustic signal sounds an alarm informing the user that rewinding has stopped.

1.

Connect the supply cable to the printer.

2.

Switch the unit on and you will hear a beeping sound 
signaling that the unit is “out of labels”.

3.

Lift the arm manually and you will notice that the 
Rewinder starts to move faster as the arm is lifted higher.
The movement slows down as you lower the arm.

4.

While testing the arm functionality you can also regulate 
the speed with the speed knob.

 

w w w . p r i m e r a . c o m       •

•         w w w . p r i m e r a

- e u r o p e . e u

Fon: +49(0) 611 9 27 77 - 0

Mainzer Straße 131

Fax: +49(0) 611 9 27 77 - 50

D 65187 Wiesbaden / Germany

email:sales@primera-europe.eu