Petsafe Beverage Dispenser 400-1255-19 User Manual

Housing Cover: the cover or lid snaps in place over the 
filter housing well, keeping pets out of the charcoal filter.

Housing: here the water is pumped up through the 
housing to cycle through the charcoal filter and out the 
spout to create a long five-inch waterfall into the bowl. 

Pre-filter: a small intake grate that will catch large particles 
such as hair and kibble before they reach the filter. The 
pre-filter can be removed by pulling up on the lip at the top. 
To replace, slide back into place over the flow control knob 
and push down until it clamps around the knob.

Bowl: the Drinkwell

®

 bowl is the foundation of the fountain. 

It features two handles on either side of the fountain as 
well as a “cord channel” to hide the cord from view. 

Flow Control Knob: the black knob that attaches to the 
motor which will adjust the rate of water flow. The pre-
filter will snap around the neck of the flow control knob 
which will lock it into place. The knob is attached to the 
motor and can be removed by taking the motor apart (See 
section “Motor Maintenance”).

Motor or Pump: a small submersible aquarium pump 
that can be dismantled for cleaning. 

DISHWASHER SAFE! Remove pump from fountain before 
cleaning (See “Motor Maintenance”)  The pump cord also 
features a removable inline plug for easy attachment. 

Reservoir: the extra capacity reservoir holds over a half 
gallon of water. The reservoir cap will help to minimize 
spills when you refill the reservoir.     

1)

2)

3)

4)

5)

6)

7)