Pertech 5300 User Manual

Pertech Resources Inc.

November 2005

220321A

2.75 Inches

1.75 Document Stop

Right Edge of Form Aligned with Right

Edge of Receipt Retail Endorsement. To

center justify check in print zone, docu-

ment guide is 2.625” from dot column #1

1 Inch

Print field is 2.5” Wide

Right Justify

Validation Print Fields

The 5300 series printer has 2.5 inch wide printfield.

The validation print field height is adjustable from .17 to 1.75

inches. This can be done via the configuration utility or the

one button setup. An inserted form can be manually aligned

or a optional document guide can be attached to provide a

fixed right side stop for the inserted form. The drawings be-

low indicate the typical print positions for a 2 3/4” X 6” form.

The highlighted area is the printfield width and Maximum

height.

Note: The one button set-up only has three selectable docu-

ment stop settings. Using the Configuration Utility the docu-

ment stop can be adjusted to any desired printfield height

within the parameters specified above.See Configuration and

Diagnostics section of this manual for available options.

3 Inches

1 Inch

Print Zone

2 Inches for 6” Check

Print field is 2.5” Wide

Left Justify

3 Inches

1 Inch

Print field is 2.5” Wide

Right Justify

3.5 Inches

3 Inches

1 Inch

Print field is 2.5” Wide

Center Justify

3.25 Inches

Bank of F

irst Deposit (BOFD) Endorsement A470, bit [print field is ;larger

Dot column #1 Dot Column #400

Print Zone

2 Inches for 6” Check

Print Zone

2 Inches for 6” Check

3 Inches

1 Inch

Print field is 2.5” Wide

Right Justify

2.75 Inches

Right Edge of Form Aligned with Right

Edge of Receipt BOFD Endorsement

Effective print area in Endorsement zone

is 1.75” wide.

Print Zone

2 Inches for 6” Check

1.75 Document Stop

Validation and Document Guides

3 Inches

1 Inch

Print Zone

2 Inches for 6” Check

Doc ument Guide

2.5” Wide Print Field

Left Justify

Right Justify

To 2” Print Zone:

Note: The Print Field is 2.5” wide. Left Justification

will overlap into the 1” right zone. Right Justifica-

tion will overlap into 3” left zone.